5ft British Giant Large Double Rabbit Hutch + Upstairs Winter Protection

£447.51

Treatment Options *

Treatment Options (what are these?)

Optional Extras

Product Add-Ons (what are these?). Please indicate the amount of each item you would wish to purchase by entering a number into the entry field. Please note, you can leave each entry field as blank if you do not require any add-ons.

Product Description

This large breed rabbit hutch is illustrated in our standard (non pressure treated) preservative.

Key Features

  • Large breed rabbit hutch for larger breeds
  • RSPCA, PDSA and RWAF recommended size
  • 39 cubic feet of living space
  • Gable roof with waterproof membrane
  • Removable internal dividers
  • Removable roof for cleaning
  • Predator safe rabbit hutch
  • Lockable bolt locks + latches as standard
  • 6” (150mm) legs as standard
  • Hand built in the UK
  • Fully assembled rabbit hutch delivery service
  • Also suitable as an indoor rabbit hutch

Dimensions (approx.)

  • Rabbit Hutch (excluding the legs):
  • H 1220mm (49″)
  • W 1525mm (60″)
  • D 635mm (25″)

[vc_single_image image=”4442″ img_size=”medium” onclick=”link_image”]

For larger breeds such as French Lops – British Giant – Flemish Giant etc… This 5ft large breed rabbit hutch is made from Redwood and has two exterior graded hardwood ply base panels. 

The roof is boarded with the same shiplap as the hutch and is constructed on the same principle as the traditional roof on a domestic house. Beneath the boarding is a polypropylene twin skin rigid membrane with an air gap to ensure extra warmth and a watertight construction. The air gap provides an insulating barrier inside the hutch to help prevent heat loss. We are the only company to provide this level of insulation as an integral part of our product. The roof also has a 3” (75mm) overhang to all sides. 

We only use 1st class materials for an unbeatable build quality

The hutch is constructed from Swedish Redwood and is cladded on the outside with 12mm shiplap. The door frames are made out of a substantial 34mm x 46mm section and come with two solids boarded doors at each end on the bottom level and one solid door on the top left of the upper level. The upper level right door is a wire door but this is fitted with a winter panel in addition to the central section which has a winter panel fitted too. The benefits to this is to be able to have the best of both worlds in allowing light into the hutch but also offering the maximum security to the upper hutch with the winter panel fitted. The lower central portion of the hutch is left open. The left hand end of the top hutch is designated as the sleeping area and there is an internal divider that can easily be removed in seconds to allow you to clean the entire hutch throughout.

Locks included for extra security

The hutch’s solid doors come with black tower bolts and spring loaded catch on the wire door as well as a turn button for added security. The tower bolts are a standard feature on all solid doors but can be upgraded to padlock bolts for a nominal charge.

The hutch will come on 6” (150mm) legs as standard.

This hutch is made entirely in The United Kingdom by us and is not sold by any other company in the UK.

We can accommodate bespoke requirements to your hutch

There are many variations of this hutch on the website to suit your budget and available space such as with a run on the rear or on top of a run too. The size of run can vary to your preference in terms of length. Please contact us if you have any bespoke requirements as we are able to accommodate this during the construction stage. 

This is a superior quality and well-constructed hutch offering just over 39 cubic feet of living space.

Looking for a different size? Check out our complete range here!


Add-On Options

A Sliding Door Kit can be fitted to the upper floor so as to block off access to the ramp. E.g. when closed you can confine you bunny upstairs or downstairs.

A Hinged Rabbit Hutch Roof Kit can be added at the rear so that it will open and close like a lid. It has a bonnet like stay to keep it up, and a hasp and staple at the front so you can lock the rabbit hutch roof closed!

Winter Proofing Panels can be fitted to cover the lower centre wire panel. The panels simply clip on and when fitted will keep out inclement or winter weather. The panels provide extra warmth of a night time and also maximum security for your pets.

A Central Door Conversion Kit can convert any central fixed wire panel to a wire door. Although you can reach into this area through either of the end doors, the additional kit will allow fuller access to the middle area of the hutch.

Padlock Compatible Lock Upgrade. All solid doors have a tower bolt fitted. However you can have this bolt upgraded to a lockable version which will accommodate a padlock.

Additional information

Internal Hutch Dimensions 1525 × 635 × 685 mm
Rabbit Breed

, , , , , , , , ,

We do not use couriers to deliver our products as we believe in a total service from construction to meeting our customers face to face. There is a delivery charge from £24.95 per total order whether your order is 1 or 100 items (applies to UK mainland only – certain areas will incur an additional fee). This payment includes assembly and a final silicone treatment after your product is completed, for additional protection against the elements.

Please note the optional tantalizing process may delay your expected delivery date.

Materials

Part Details
Roof/Hutch Clad Swedish Redwood
Run/Frames Swedish/Russian Redwood
Plywood Bases & Doors Exterior grade
Nails Galvanized
Screws Zinc plated/Black Japan
Preservative Teak water based (non toxic)
Hinges/Turn buttons Black Japan

Pressure Treatment Options

For maximum protection, we can tanalise your product (a form of pressure treatment) to help give you up to 10 years without the worry from dry rot and normal decay typical to all outdoor wooden furniture. Click here to find out more.

Maintenance

All our products are finished with a Teak water based (non toxic) preservative. The timber should be re-coated with an equivalent preservative every year to ensure the maximum life span of the product.

Oil based coatings are the best as they tend to repel water before it penetrates the timber fibers.

Re-coating is best undertaken on a warm dry day or even better after a dry spell when the timber has had time to dry enough to absorb the coating you are applying.

Additional Protection

Here’s a bit of a tip – get yourself an atomizer spray!

Get yourself an atomizer spray – the sort you do your indoor plant leaves with. Most DIY shops sell what’s called a waterproofing agent. Thompson’s Water seal is a brand name but “B&Q” do their own brand.

Fill the atomizer with it and spray over the external surfaces of the product a couple of times a year. It’s really quick and easy. Don’t forget to wear appropriate mask and gloves. Follow the Health and safety instructions on the container.